150W 10-32V to 12-35V Adjustable Step-up Voltage Charger Module

​Description:

• Module Properties:non-isolated step-up module (BOOST). 

• Input Voltage:DC 10-32 V. 

• Output Voltage:DC 12-35 V(Adjustable).  

• Output Current:6A(MAX). 

• Input Current:10A(MAX) (please enhance heat dissipation while more than 10A).   

• Output Power:natural cooling 100W (MAX),enhance heat dissipation 150W(MAX). 

• Conversion Efficiency:94% (measured at Input 16V,output 19V 2.5A)  

• Operating Temperature:Industrial(-40°c to +85°c) (please lower power use enhance heat dissipation if ambient temperature exceeds 40°C).  

• Full Load Temperature rise:45°c  

• No-load Current:25mA typical  

• Voltage Regulation:±0.5%  

• Dynamic Response Speed:5% 200uS  

• Short Circuit Protection:None(Please install fuses and protection circuits at input ports)  

• Input Reverse Polarity Protection:None(Please comply with a reverse protection or connect a diode at input ports) 

• Size: 65 mm *23 mm * 56.5 mm(L * H * W) 

Applications: 

• DIY an adjustable on-board vehicle power supply,connect the 12V input,and output could be 14-35V (adjustable),but the output voltage should be higher than the input voltage. 

• DIY a booster charger.You can use the 12V power supply to charge battery more than 12V such as 24V battery.  

• Vehicle laptop power supply,connect the 12V power supply,adjust the output voltage for your laptop need.  

• Provide power for your electronic equipment. 

• Pre-supply system.