ST Chip STM8S207CBT6 LQFP-48 8-Bit Microcontroller 128Kb

Description: 

• The STM8S20xxx performance line 8-bit microcontrollers offer from 32 to 128 Kbytes Flash program memory. They are referred to as high-density devices in the STM8S microcontroller family reference manual.

• All STM8S20xxx devices provide the following benefits: reduced system cost, performance robustness, short development cycles, and product longevity.

• The system cost is reduced thanks to an integrated true data EEPROM for up to 300 k write/erase cycles and a high system integration level with internal clock oscillators, watchdog, and brown-out reset.

• Device performance is ensured by 20 MIPS at 24 MHz CPU clock frequency and enhanced characteristics which include robust I/O, independent watchdogs (with a separate clock source), and a clock security system.

• Short development cycles are guaranteed due to application scalability across a common family product architecture with compatible pinout, memory map and modular peripherals. Full documentation is offered with a wide choice of development tools.

• Product longevity is ensured in the STM8S family thanks to their advanced core which is made in a state-of-the art technology for applications with 2.95 V to 5.5 V operating supply.

Parameters:

Core

• Max fCPU : up to 24 MHz, 0 wait states @ fCPU ≤ 16 MHz

• Advanced STM8 core with Harvard architecture and 3-stage pipeline

• Extended instruction set

• Max 20 MIPS @ 24 MHz

• Memories

• Program: up to 128 Kbytes Flash; data retention 20 years at 55 °C after 10 kcycles

• Data: up to 2 Kbytes true data EEPROM; endurance 300 kcycles

• RAM: up to 6 Kbytes

• Clock, reset and supply management

• 2.95 to 5.5 V operating voltage

• Low power crystal resonator oscillator

• External clock input

• Internal, user-trimmable 16 MHz RC

• Internal low power 128 kHz RC

• Clock security system with clock monitor

• Wait, active-halt, & halt low power modes

• Peripheral clocks switched off individually

• Permanently active, low consumption power-on and power-down reset

• Interrupt management

• Nested interrupt controller with 32 interrupts

• Up to 37 external interrupts on 6 vectors

Timers

• 2x 16-bit general purpose timers, with 2+3 CAPCOM channels (IC, OC or PWM)

• Advanced control timer: 16-bit, 4 CAPCOM channels, 3 complementary outputs, dead-time insertion and flexible synchronization

• 8-bit basic timer with 8-bit prescaler

• Auto wakeup timer

• Window watchdog, independent watchdog

• Communications interfaces

• High speed 1 Mbit/s active beCAN 2.0B

• UART with clock output for synchronous operation - LIN master mode

• UART with LIN 2.1 compliant, master/slave modes and automatic resynchronization

• SPI interface up to 10 Mbit/s

• I2 C interface up to 400 Kbit/s

• 10-bit ADC with up to 16 channels

• I/Os

• Up to 68 I/Os on an 80-pin package including 18 high sink outputs

• Highly robust I/O design, immune against current injection

• Development support

• Single wire interface module (SWIM) and debug module (DM)

• 96-bit unique ID key for each device